Cabinet construction and mineral polymer baffle
The movement of individual drivers can cause unwanted vibrations to be emitted from the cabinet, especially from the front baffle. The CS6 cabinet uses a very rigid cast mineral polymer baffle to greatly reduce energy storage and unwanted vibration for improved clarity and imaging performance. Internal cabinet bracing, 1-inch thick cabinet walls, and cast magnesium driver chassis further reduce unwanted vibration.

The midrange driver also has its own non-reflective sub enclosure to isolate the midrange from interaction with the woofer,and further reduce diffraction for better midrange performance.

Specifications

Driver complement and description 3-way system with 1" tweeter coaxially mounted with 4" three-layer diaphragm midrange; 10" woofer with 10-pound magnet; 12" passive radiator; all drivers use metal diaphragms, short coil/long gap motors and cast aluminum chassis; cast concrete baffle

Bandwidth (-3dB) 27 Hz-25 kHz

Amplitude response 29 Hz-18 kHz ±2 dB

Phase response minimum ±10°

Sensitivity 86 dB @ 2.8 V-1m

Impedance 4 ohms (2.4 ohms minimum)

Recommended power 100-500 watts

Size (W x D x H) 13 x 18 x 50 inches

Weight (each) 156 pounds

Warranty 10 years