b 100 SST Specifications

B100 SST DAC Specifications
Preamplifier
Frequency Response 20Hz-20kHz +/-0.05dB
IM or THD <0.005% a 3 volts out
High Level Sensitivity 1V
Rated Noise Ref. 1V
20-20kHz - 100dB
Features
  • 6 stereo RCA inputs
  • 4 with DAC
  • 1 stereo RCA output
  • 1 stereo tape loop
  • Headphone output
  • Full function remote (optional)
  • Optional MM phono stage
  • DAC
Amplifier
Watts 100 watts per channel, 8 ohms
180 watts per channel, 4 ohms
Harmonic distortion Less than 0.005% from
20 Hz to 20 kHz at 100 watts
IM distortion Less than 0.005% from 10 milliwatts to 100 watts
Noise 108dB below full output
Slew Rate > 60 volts per microsecond
Power bandwidth 0.5Hz to over 100 kHz
Damping Factor Over 500 at 20 Hz, ref. 8 ohms
Input sensitivity and impedance 1 volt in = 100 watts 50k
Features

  • Regulated power supplies to all voltage gain stages

  • Each channel employs completely independent power supply

  • Will deliver full output to any phase angle at 4 ohms or higher.

  • 1 stereo RCA input, 50K

  • Pre-out/main-in connectors

Dimensions 19 or 17 x 4.75 x 16 inches,
48.26 or 43.18 x 12.1 x 40.64 cm
wt: 30 lbs, 13.6 kg
Finish Black or Silver