B-60 SST C-Series Specifications

Preamplifier
Frequency Response 20Hz-20kHz +/-0.05dB
Maximum output 15 volts
IM or THD <0.005% a 3 volts out
High Level Sensitivity 500mV
Features
  • 4 stereo RCA inputs
  • 1 stereo RCA output
  • 1 stereo tape loop
  • Headphone output
  • Gold plated switch, contacts and connectors
  • Optional remote, volume and mute
  • Also Available with Moving Magnet Phono Stage
  • Available Now w/ Silver Faceplate

Amplifier

Watts 60 watts per channel, 8 ohms

100 watts per channel, 4 ohms
Harmonic distortion Less than 0.02% from
20 Hz to 20 kHz at 60 watts
IM distortion  Less than 0.01% from 10 milliwatts to 60 watts
Noise 106dB below full output
Slew Rate > 60 volts per microsecond
Power bandwidth 0.5Hz to over 100 kHz
Damping Factor Over 500 at 20 Hz, ref. 8 ohms
Input sensitivity 0.775 volt in for full output 50 K
& impedance
Features

  • Regulated power supplies to all voltage gain stages

  • Each channel employs completely independent power supply Will deliver full output to any phase angle at 4 ohms or higher 1 stereo RCA input,

  • 50 K Pre-out/main-in connectors Optional rack mount available

A/C Power
Consumption &
Heat Load
1. Idle Current 38W
2. Each Chan. 8 Ohms (60W ea.) 302W
3. Each Chan. 4 Ohms (100W ea.) 475W
4. Max. Wattage 475W
5. Max. Heat Dissipation 275W / 939 Btu/Hr
Dimensions 17 x 1.75 x 10.5 inches