The Audio People
The Audio People
Products Profile Contact Us Home
spacer

bullet Amplifiers :  Cinema Grand Series II

For the past 25 years, Bob Carver has been designing some of the world's most renowned amplifiers. Bob continues his legacy with the Cinema Grand (now in second generation "Series II").

Designed with Bob Carver's patented Tracking Downconverter power supply, the Cinema Grand produces a solid 225 watts per channel – and can do it with ease into vanishingly low impedances.

The Sunfire Cinema Grand is a theater amplifier that competes with the best two-channel audio amplifiers. It is a warm, powerful and present five-channel amplifier that can power nearly any speaker to its musical potential.

Feature and Specs

: 225 watts rms continuous per channel, all channels driveninto eight ohms from 20Hz to 20kHz with no more than 0.5% T.H.D.
: 450 watts rms per channel into four ohms
: 900 watts rms per channel into two ohms – time- limited basis
: Two output options: current source for a warmer, more open tube sound or voltage source for all the tight response this awesome solid state amplifier can deliver
: Intrinsic frequency response one Hz to 80 kHz
: Signal present auto-on switch
: Balanced XLR and unbalanced RCA inputs
: High-quality five-way binding posts
: Dimensions: 19" wide, 6.5" high, 15.75" deep
: Five-year parts and labor warranty

Architectural model:

: 17" wide to allow installation in standard rack systems
: Adds a 12VDC trigger input with 1/8" mini jacks and removable binding post
: 17" wide, 5.9" high (including feet), 16.7" deep (to tips of connectors).

Click image to enlarge
spacer
Top

bullet Amplifiers : Sunfire Signature Stereo Amplifier Series II

The Sunfire Signature Stereo Amplifier (now second generation "Series II") is our very best two-channel amplifier, combining more than 25 years of Bob Carver's experience and patented technology. We call this amp our "Signature" because Bob personally signs each unit's faceplate.

The Sunfire Signature Stereo Amplifier has nearly double the output of the Sunfire Amplifier. The Sunfire Signature Amplifier is capable of driving any loudspeaker, virtually regardless of impedance or power requirements.

We urge anyone to audition a Sunfire Signature Stereo Amplifier – regardless of budget.

Feature and Specs

: 625 watts rms continuous per channel, into eight ohms from 20Hz to 20kHz with no more than 0.5% T.H.D.
: 1,300 watts rms per channel into four ohms
: 4,000 watts one ohm RMS per channel – time-limited basis
: Two output options: current source for a warmer, more open tube sound or voltage source for all the tight response this awesome solid state amplifier can deliver
: Intrinsic frequency response one Hz to 80 kHz
: Balanced XLR and unbalanced RCA inputs
: High quality all metal five way binding posts
: Hand-signed by Bob Carver
: Dimensions: 19" wide, 6.5" high, 15.75" deep
: Five-year parts and labor warranty

Architectural model:


: 17" wide to allow installation in standard rack systems
: Adds a 12VDC trigger input with 1/8" mini jacks and removable binding post
: 17" wide, 5.9" high (including feet), 16.7" deep (to tips of connectors).

Click image to enlarge
spacer
Top

bullet Amplifiers :  Sunfire Stereo Amplifier Series II

A lack of power commonly creates edginess and audible distortions often heard in many systems. This is specifically why Bob Carver made the Sunfire Stereo Amplifier (now second generation "Series II") a 325 watt per channel powerhouse.

Bob Carver graces all Sunfire amps with his patented Tracking Downconverter power supply which produces unparalleled power levels into vanishingly low impedance loads while running cool.

Electrostatic/planar type speakers like Martin Logan or Magnepans can dip as low as one ohm while most dynamic loudspeakers typically range from four to eight ohms impedance. Our mighty Sunfire Stereo amp can power them all with ease.

Feature and Specs

: 325 watts RMS continuous - per channel - into eight ohms from 20Hz to 20kHz with no more than 0.5% T.H.D.
: 650 watts rms per channel into four ohms
: 1,300 watts rms per channel into two ohms - time limited basis
: 2,600 watts rms per channel into one ohm - time limited basis
: Patented "Tracking Downconverter" power supply
: Two output options: current source for a warmer, more open tube sound or voltage source for all the tight response this awesome solid state amplifier can deliver
: Intrinsic frequency response 1Hz to 80kHz
: Balanced XLR and unbalanced RCA inputs
: High quality five way binding posts
: Dimensions: 19" wide, 6.5" high, 15.75" deep
: Five-year parts and labor warranty

Architectural model:


: 17" wide to allow installation in standard rack systems
: Adds a 12VDC trigger input with 1/8" mini jacks and removable binding post
: 17" wide, 5.9" high (including feet), 16.7" deep (to tips of connectors).



Sunfire Stereo Amplifier Series II
Click image to enlarge
spacer
Top

spacer
Sunfire
spacer
bullet Subwoofers
spacer
bullet Preamplifiers
spacer
bullet Receivers
spacer
bullet Amplifiers
spacer
bullet Hall of Fame
 
[ HOME ]  [ PRODUCTS ]  [ PROFILE ]  [ CONTACT US ]