| |
|
|
|
|
|
 |
DAB specifications - Supported DAB modes I, II, III and IV VHF 174 240 MHz RF frequency range
VHF sensitivity -96 -97dBm (Measured to EN50248)
L-Band sensitivity -95 -96.5dBm (Measured to EN50248)
L-band after error correction -15 dBm Maximum Input Signal for Pseudo channel BER with real value 0.02
Band III after error correction 0 dBm
Adjacent Channel Selectivity 32 33 dBm (Measured to EN50248)
Far-off selectivity 48 dBm
Acquisition sensitivity 101 dBm
Input Impedance 50? F type connector (to VHF/L-band diplexer)
FM Specifications - RF Frequency
Range 87.5-108 MHz
RF Sensitivity (S+N)/N=26dB, 90MHz@22.5kHz 5 µ V Dev. F.mod=1KHz
RF Limiting Sensitivity 0.5 µ V
(S+N)/N Ultimate s/n ratio 63 dB (90MHz@200mV/22.5KHz Dev. Fmod=1KHz)
THD 0.5% (90MHZ@200mV/75KHz Dev.Fmod=1 KHz)
Stereo Channel Separation 30dB
RDS data CENELEC EN50067 compliant
Operating frequency FM Band 88-108MHz
Band III 174-240MHz
L-Band 1452-1492MHz
Gain FM & Band III 2dBi
Gain L-Band 5dBi
Impedance 220k Ohms
Overload margin 26dB
Channel separation > 80dB typical
Frequency response 20Hz to 20kHz, + 0, - 0.2dB
Signal / noise ratio > 96dB 'A'-weighted
Input sensitivity 2.5mV (moving magnet)
Input impedance 47k Ohms
Overload margin 24dB
Line level inputs 3 pairs line level RCA connectors
1 front panel 3.5mm jack socket (sharing AUX1 input)
1 pair phono (MM) RCA connectors
Line level outputs 1 pair RCA [preamp] controlled by the volume
1 pair RCA [tape record] fixed line level output
Speaker outputs 1 pair 4mm banana plug/binding posts per channel
Power requirement For use only with suitable Musical Fidelity power supply. (A Triple-X unit is included)
Unit only, unboxed 3.85kg, 8.5lbs
In shipping carton (including triple-X PSU) 11kg, 24.2lbs
Remote control (A5 universal type)
2 batteries size LR03 or AAA, manganese alkaline type Triple-X PSU
|
| |
|
|
|
|
|
|
|
|
|
