Products - Musical Fidelity - kwtube6112linepreamplifier
 
 
SPECIFICATIONS

OUTPUT:

VOLTAGE RMS, MAXIMUM > 62 Volts

PEAK-TO-PEAK INSTANTANEOUS OUTPUT CURRENT 4.5 Amps

IMPEDANCE< 0.5 Ohm

FREQUENCY RESPONSE : 20Hz to 30kHz ±0.5dB

LINE INPUTS :

TOTAL HARMONIC DISTORTION + NOISE, 20HZ TO 20KHZ < 0.0068% (5 Volts output, maximum volume)

SIGNAL / NOISE REF. 1 VOLT RMS OUTPUT > 105dB ('A'-weighted, at half volume)

INPUT SENSITIVITY FOR 1 VOLT RMS OUTPUT : 240mV

INPUT IMPEDANCE
: 500k Ohms

GAIN AT MAXIMUM VOLUME : 12.5dB (4.2 times)

OVERLOAD MARGIN : 35dB for rated input at maximum volume

CHANNEL SEPARATION
: > 84dB 20Hz to 20kHz, maximum volume

CHANNEL BALANCE ERROR : < 0.5dB typical, worst case 1.5dB with volume control at around 8 o'clock position

GENERAL:

INPUT IMPEDANCE : 47k Ohms

OVERLOAD MARGIN : 24dB

INPUTS : 4 pairs line level RCA connectors, 1 pair (Home Theatre) direct power amplifier input RCA connectors

OUTPUTS : 1 pair RCA main output controlled by the volume, 1 pair RCA tape record fixed line level output.

POWER REQUIREMENT : 115 / 230Volts or 100V AC 50 / 60Hz (factory pre-set), 60 Watts

WEIGHT : 20.55kg, 45.3 lbs unit only, unboxed 25.5kg, 56.2 lbs in shipping carton

DIMENSIONS : 483 mm, 19 inches wide 167 mm, 6.6 inches high including feet 450 mm, 17.7 inches deep including knob and rear terminals

STANDARD ACCESSORIES : IEC type mains lead (10-Amp type), remote control (kW universal type), 2 batteries size LR03 or AAA, manganese alkaline type
 
Showroom Contact Us
Copyright © 2007 Audio People. All right reserved Designed by Webindia