| |
|
|
|
|
|
 |
Output:
Voltage, RMS 70 Volts 20Hz to 20kHz
Voltage, Peak-to-peak .201 Volts
Power 630 Watts per channel into 8 Ohms (28dBW),
910 Watts per channel into 4 Ohms
Current, peak-to-peak 200 Amps
Damping factor 200
Output devices per channel 12
Pre-out impedance 50 Ohms
Line inputs:
Harmonic distortion at 1kHz 0.005%
THD + noise, 20Hz to 20 kHz < 0.01% typical
Signal/noise ratio >99dB 'A' -weighted
Input sensitivity for 630 watts 450mV
Input impedance 220k Ohms
Overload margin 37dB
Channel separation >75dB typical
Frequency response 20Hz to 20 kHz, +0, -0.2dB
20Hz to 60 kHz, +0, -1.4dB
Phono input:
RIAA/IEC combined response See chart below
Signal / noise ratio > 96dB 'A'-weighted
Input sensitivity 3.0mV (MM)
0.4mV (MC)
Input Impedance 47k Ohms (MM and MC)
Overload margin 24dB (MM and MC)
Connections:
Line level inputs 5 pairs line level RCA connectors,
1 front panel 3.5mm jack socket (sharing AUX 1 input)
1 pair phono (MM/MC) RCA connectors,
Line level outputs 1 pair RCA [preamp] controlled by the volume
1 pair RCA [tape record] fixed line level output
Speaker outputs 2 pairs 4mm banana plug/binding posts per channel
Power requirements 100 / 115 / 230Volts AC50 / 60Hz (factory pre-set),
1950 Watts maximum into 8 Ohms, 120 Watts idle
Dimensions:
Main Unit 485mm, 19.1 inches wide
170mm, 6.7 inches high inc. feet
470mm, 18.5 inches deep inc. terminals
Power supply 365mm, 14.4 inches wide
170mm, 6.7 inches inc. feet
440mm, 18.5 inches inc. terminals
Weight:
Main Unit 23kg, 51lbs unboxed
28kg, 62lbs in shipping carton
Power supply 32kg, 70lbs unboxed
35kg, 77lbs in shipping carton
Standard accessories:
IEC mains lead - (16-Amp type)
Power supply lead, main (two) 0.7M long + (two) 1.2M long
Power supply lead, for pre-amplifier (one) 0.7M long + (one) 1.2M long
Remote control (KW, universal type)
2 batteries size LR03 or AAA, manganese alkaline type
|
| |
|
|
|
|
|
|
|
|
|
