| |
|
|
|
|
|
 |
Power 250 Watts per channel into 8 Ohms (24dBW), 400 Watts per channel into 4 Ohms
Voltage, RMS 45 Volts 20Hz to 20kHz
Voltage, Peak-to-peak 127.3 Volts
Current peak-to-peak 75 Amps
Damping factor 140
Output devices per channel 4
Pre-out impedance 50 Ohms
Total harmonic distortion + noise, 20Hz to 20kHz < 0.01%
Signal / noise ratio > 100dB 'A'-weighted
Input sensitivity for 250 Watts into 8 Ohms 330mV
Input impedance 220k Ohms
Overload margin 26dB
Channel separation > 70dB typical
Frequency response 20Hz to 20kHz, +0, -0.2dB
Home Theatre Direct input
Input sensitivity 30dB gain (31.5 times) nominal
Frequency response reference IEC RIAA - see graph below
Signal / noise ratio > 96dB 'A'-weighted
Input sensitivity 2.5mV (moving magnet)
Input impedance 47k Ohms
Overload margin 24dB
Inputs 4 pairs line level RCA connectors.
1 pair (Home Theatre) direct power amplifier input RCA connectors.
1 pair phono (moving magnet) RCA connectors.
Outputs 2 amplifier channels via 1 pair per channel binding posts.
1 pair RCA audio outputs controlled by the volume.
1 pair RCA tape record fixed line level output.
Power requirement 100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),
700 Watts maximum into 8 Ohms, 35 Watts idle
Weight 16.6 kg, 36.6 lbs unit only, unboxed
19.1 kg, 42.1 lbs in shipping carton
Dimensions 440 mm, 17.3 inches wide
125 mm, 4.9 inches high including feet
400 mm, 15.75 inches deep including terminals
Standard accessories IEC type mains lead (10-Amp type),
remote control (A5, universal type),
2 batteries size LR03 or AAA, manganese alkaline type
|
| |
|
|
|
|
|
|
|
|
|
