| |
|
|
|
|
|
 |
Voltage, RMS 29 Volts 20Hz to 20kHz
Voltage, peak-to-peak 84 Volts
Impedance 50 Ohms
Frequency response 20Hz to 20kHz, ±0dB
Total harmonic distortion + noise, 20Hz to 20kHz < 0.01%
Signal / noise ratio reference 1 Volt RMS output > 100dB 'A'-weighted
Input sensitivity for 1 Volt output 240mV
Input impedance 220k Ohms
Gain at maximum volume 12.5dB (4.2 times)
Overload margin 31dB
Channel separation > 70dB typical
Input sensitivity Zero gain, not effected by volume control
Phono input
Frequency response reference IEC RIAA - see graph
Signal / noise ratio ref.1 Volt RMS output > 94dB 'A'-weighted moving magnet
> 88dB 'A'-weighted moving coil
Input sensitivity for 1 Volt RMS output at 1kHz 2.5mV moving magnet
370µV moving coil
Input impedance 47k Ohms
Overload margin Moving magnet : 31.2dB,
Moving coil : 30.9dB
Inputs 4 pairs line level RCA connectors,
1 pair (home theatre direct) power amplifier input RCA connectors
1 pair phono RCA connectors
Outputs 1 pair RCA main output controlled by the volume,
1 pair RCA tape record fixed line level output.
Power requirement 100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set), 10 Watts maximum
Weight 13.15 kg, 29 lbs unit only, unboxed
18 kg, 39.5 lbs in shipping carton
Dimensions 440 mm, 17.3 inches wide
125 mm, 4.9 inches high including feet
397 mm, 15.6 inches deep including terminals
Standard accessories IEC type mains lead (10-Amp type),
Remote control (A5 type - universal),
2 batteries size LR03 or AAA, manganese alkaline type
|
| |
|
|
|
|
|
|
|
|
|
