|
Our C-CAM® (Ceramic Coated Aluminium Magnesium alloy) cone profiles and rubber surrounds maximise the potential of the driver mechanism. The new surrounds allow greater cone excursions allowing lower distortion and improved frequency response linearity. The flush cone edge provides a very smooth response and a natural, accurate sound.
Improvements to the surround and motor system have extended the frequency response to 30kHz, so that it is ready to exploit new wide bandwidth digital audio formats such as SACD and DVD-A. |
 |
|
An additional high frequency control offers a fine-tuning option to allow the user to set-up the system precisely and obtain optimum performance within the listening environment. This additional flexibility makes the Silver CP In-Wall speakers suitable for a wider range of demanding residential and commercial applications.
The easy-to-install CP loudspeakers will accommodate walls whose depth is between 9mm and 32mm. A secure fixing for the speaker/back-box is made by simply tightening the fixing clamps. Each CP speaker is supplied with a paintable grille, cut-out template, two Grille membranes (one for use during painting and the other as a clean replacement) and two spare baffle fixing screws. |
|
60Hz - 30KHz |
89dB |
8 Ohms |
105.8 dBA |
100W |
30 - 100W |
Sealed Enclosure |
1 x 6" C-CAM® bass driver |
1” (25mm) C-CAM® Gold Dome with rare earth magnet |
423mm high x 270mm wide
(16 11/16" x
10 11/16") |
100mm
(3 15/16") |
387mm high x 234mm wide
(15 1/4 x 9 1/4 inches) |
95mm
(3 15/16") |
+3dB / 0dB / -dB high freq switch |
8 position 'dog' type fixings |
Gold Plated 'push' type teminals |
Mineral filled ABS plastic
(ul V1 fire rated) |
3.2Kg
(7.04) |
|
|
|
The Bronze drive unit, (MMP® II) offers an advanced driver technology developed from Monitor Audio’s original Metal Matrix Polymer cone material and uses a high-pressure injection moulding process to achieve different thickness at critical points in the cone geometry.
MMP® II provides better stiffness and consistency and tighter production tolerances resulting in superior sonic performance. The new bass-mid chassis design has a vented rear section that reduces thermal power compression to deliver increased dynamic range and higher sound pressure levels. This venting also lowers distortion by balancing the pressure within the voice-coil motor system. It means clean, crisp bass and an even clearer mid-range performance. |
|
High frequency performance has been improved by the evolution of the C-CAM® Gold Dome tweeter. The new tweeter utilises a pivoting action to provide optimum imaging and flexible set-up options. The bespoke crossover uses high-grade polypropylene film capacitors, and low distortion inductors.
The easy-to-install CP loudspeakers will accommodate walls and ceilings whose depth is between 9mm and 32mm. A secure fixing for the speaker/back-box is made by simply tightening the fixing clamps. Each CP speaker is supplied with a paintable grille, cut-out template, two Grille membranes (one for use during painting and the other as a clean replacement) and two spare baffle fixing screws. |
|
62Hz - 22KHz |
8 Ohms |
88dB |
105 dBA |
80W |
20 - 80W |
Sealed Enclosure |
1 x 6.5" MMP®II second generation metal matrix polymer |
1” (25mm) C-CAM® Gold Dome with rare earth magnet |
423mm high x 270mm wide
(16 11/16" x 10 11/16") |
100mm
(3 15/16") |
387mm high x 234mm wide
(15 1/4 x 9 1/4 inches) |
95mm
(3 15/16") |
N/a |
8 position 'dog' type fixings |
Gold Plated 'push' type teminals |
Mineral filled ABS plastic
(ul V1 fire rated) |
3.1Kg
(6.82) |
|
|
|
Gold ‘CP’ In-Wall speakers utilise our C-CAM® (Ceramic Coated Aluminium Magnesium alloy) cone, featuring Rigid Surface Technology (RST®). Impressions on the cone’s surface are designed to eliminate bending, increase stiffness and lower mass when compared with conventional cone driver designs. The result is a much faster response, offering music reproduction that is closer to the original performance.
A rigid die-cast metal chassis design features a vented rear section and provides extremely low distortion with typically higher output levels.
|
|
Additional high frequency and mid-range frequency controls allow the user to set-up the system precisely to obtain optimum performance within the listening environment. This inherent flexibility makes the Gold CP In-Wall speaker suitable for a wider range of demanding applications than that offered by its competitors. It promises a truly ‘high-end’ performance from a custom fit, discreetly installed speaker system.
The easy-to-install CP loudspeakers will accommodate walls and ceilings whose depth is between 9mm and 32mm. A secure fixing for the speaker/back-box is made by simply tightening the fixing clamps. Each CP speaker is supplied with a paintable grille, cut-out template, two Grille membranes (one for use during painting and the other as a clean replacement) and two spare baffle fixing screws. |
|
55Hz - 30KHz |
89dB |
8 Ohms |
106.5 dBA |
120W |
30 - 120W |
Sealed Enclosure |
1 x 6 ½" C-CAM® bass driver featuring RST® technology |
1” (25mm) C-CAM® Gold Dome with high power ceramic magnet system & rear low resonance chamber |
423mm high x 270mm wide
(16 11/16" x 10 11/16") |
100mm
(3 15/16") |
387mm high x 234mm wide
(15 1/4 x 9 1/4 inches) |
95mm
(3 15/16") |
+3dB / 0dB / -dB high freq switch
+3dB / 0dB/ -3dB mid-range freq switch |
8 position 'dog' type fixings |
Gold Plated 'push' type teminals |
Mineral filled ABS plastic
(ul V1 fire rated) |
4.3Kg
(9.46) |
|
|
|
Celebrating an innovative synthesis of its highly successful ‘Radius’ and ‘CP’ product concepts, Monitor Audio brings to custom installers the ultimate compact architectural loudspeakers: Radius CP.
Driver technology refined to deliver the unparalleled sonic performance of Monitor Audio’s award-winning ultra-compact Radius loudspeakers has been applied to its successful Controlled Performance (CP) in-wall designs to render a completely new flush-mounting loudspeaker range for the most discrete installations. Each of the new three-strong Radius CP range is fitted with its own rigid enclosure to ensure that its exceptional sound remains consistent wherever it is installed. |
|
The in-wall models utilise a pivoting 20mm C-CAM® Gold Dome tweeter, derived from the remarkable R45 hi-fi monitor - the smallest speaker Monitor Audio has ever made. Its pivoting action allows for the critical high frequencies (to 25kHz) to be directed toward the listening position for the most accurate imaging. Radius CP delivers added installation versatility by providing this feature from in-wall as well as in-ceiling locations. The innovative in-ceiling stereo design uses dual fixed C-CAM® (Ceramic Coated Aluminium Magnesium) domes fed independently with stereo left/right signals.
Bass and mid-range frequencies are accurately reproduced by a 5” version of the acclaimed Radius MMP® II driver.
For Radius CP, Monitor Audio has combined the virtues of an award-winning ultra-compact loudspeaker range with the proven performance of its architectural designs to create a new, versatile, super-compact range of flush-mounting speakers, promising enhanced fidelity, increased dynamic range, higher sound pressure levels and ultimate control for the most discrete installations. |
|
60Hz – 25KHz |
88 dB |
6 Ohms |
103 dBA |
70W |
5-60W |
Sealed enclosure |
1x 5” MMP2 bass driver |
Pivoting 20mm C-CAM® gold alloy dome |
313 H x 211.5 W (mm)
12 5/16 H x 8 5/16 W (Inches) |
99 (mm)
3 7/8 (Inches) |
275 H x 172W (mm)
10 13/16 x 6 ¾ (Inches) |
95 (mm)
3 ¾ (Inches) |
6 position ‘dog’ type fixings |
Gold plated ‘push’ type terminals |
Mineral filled ABS plastic (UL V0 fire rated) |
1.83Kg |
|
