Products - Monitor Audio - Stand Mounted
 
 

 
  Stand Mounted    GS 10

The GS10 re-writes the book on compact monitor performance, easily eclipsing the dazzling standard set by its predecessor, the GR10. It may be small, but the GS10 showcases the multiple talents that make Gold Signature series so remarkable. With its advanced, low-resonance drivers, rigid build and contoured cabinet edges, the GS10 redefines accurate, low-colouration sound in a compact, stylish stand-mount speaker. Using the new, low distortion 6 1/2 inch RST® II bass-mid driver and gold C-CAM® tweeter developed especially for the GS series, the GS10 is capable of true 3-D imaging and tonal accuracy.
 
click image
to enlarge
Specification

Frequency Response:
40Hz - 43KHz
Sensitivity (1W@1M). dB:
88
Nominal Impedance. Ohms:
8
Maximum S.P.L (Per pair in room). dBA:
108
Power Handling (R.M.S). Watts:
100
Recommended amplifier requirements (R.M.S). Watts:
40 - 100
Bass Alignment:
Ported Bass Reflex (HiVe II Technology)
Tweeter Crossover Frequency. KHz:
2.7
Drive unit Complement:
1 x 6 ½” RST® II bass/mid-range driver 1x 1" (25mm) gold dome C-CAM® tweeter
External Dimensions -
mm (inches):
360 H x 206 W x 270 D
(14 3/16 H x 8 1/8 W x 10 5/8 D)
Weight (each):
8.5 Kg / 18.7lb

  Stand Mounted   RS1

Expect clarity, detail, speed and punch from the stand-mounting RS1, a compact, two-way reflex-ported system that incorporates a single 6” C-CAM® bass/mid-range driver and a 1” (25mm) Gold Dome C-CAM® tweeter. With high efficiency (90dB) and power handling (80W), the RS-1 will release all the dynamic impact of music and movie sound with little cost to living space.

The New Class Champion from Monitor Audio – Silver RS
click image
to enlarge

Specification

Low frequency limit
27Hz
Upper frequency limit
40 – 120 Hz Variable
Low pass filter alignment
4th order 24db/octave
Amplifier Output
150 Watts (R.M.S)
Amplifier classification
Class- D Digital amplifier
Driver compliment
1 x 10” MMP® II long throw driver
Dimensions:- Millimetres
320 H x 320 W x 340 D
Inches
12 5/8 x 12 5/8 x 13 3/8
All dimensions excluding grille
Weight (unpacked) 12.5 Kg (27.5lbs)
Input Impedance
20K Ohms
Mains input voltage
115 Vac / 230 Vac Factory Preset. Do not adjust
Finishes
Black Oak, Cherry and Walnut vinyl’s. All fitted with a black grille.


  Stand Mounted   BR1

The diminutive BR1 allows you to enjoy high quality sound in the smallest spaces. You’ll fall in love with its agile, rhythmic performance and its liberating versatility. While retaining the compact dimensions of its B1 predecessor, this reference compact monitor delivers superior bandwidth and better linearity, so you hear more music with greater definition than ever before. The two-way BR1ultiises a single 5.5” MMP® II bass driver and 1” C-CAM® tweeter within a system optimised for genuine fidelity wherever you place it in the home.
 
click image
to enlarge
Specification

Frequency Response +/- 3dB
55 Hz - 30 KHz
Sensitivity (1W@1M)
88dB
Nominal Impedance (Ohms)
6
Power Handling R.M.S (W)
70
Recommended Amplifier Requirements R.M.S (W)
15-70
Cabinet Design
Rear ported Bass reflex
Drive Unit Complement
1 x 5.5" MMP® II Bass mid-range,
1 x 1" (25mm) Gold Dome C-CAM® tweeter
External Dimensions (cm)
H x W x D
26 x 16.5 x 18 D
External Dimensions (inches)
H x W x D
10 1/4 x 6 1/2 x 7 1/16
Individual Weight Kg (lb)
3.8 (8.4)
Weight Packaged Kg (lb)
8.7 (19.1)

  Stand Mounted   BR2

click image
to enlarge
An evolution of the multi-award winning B2, the BR2 tunes the considerable talents of its forerunner to a new intensity. Improved crossover and driver designs combine to re-calibrate the capabilities of an acknowledged class champion, bringing greater dynamic expression, mid range clarity and lower distortion to lovers of music and film sound. Loaded with a 6.5” MMP® II bass driver and 1” C-CAM® tweeter, the BR2’s high quality cabinet mirrors the unobtrusive dimensions of the celebrated B2, and so is easy to position, even in smaller rooms. Compact in size, but equipped to reproduce sound of immense stature and detail, the BR2 represents a stunning advance from every angle.

Specification

Frequency Response +/- 3dB
42 Hz - 30 KHz
Sensitivity (1W@1M)
90dB
Nominal Impedance (Ohms)
6
Power Handling R.M.S (W)
100
Recommended Amplifier Requirements R.M.S (W)
30-100
Cabinet Design
Front ported Bass reflex
Drive Unit Complement
1 x 6.5" MMP® II Bass mid-range,
1 x 1" (25mm) Gold Dome C-CAM® tweeter
External Dimensions (cm)
H x W x D
35 x 18.5 x 25
External Dimensions (inches)
H x W x D
13 3/4 x 7 5/16 x 9 13/16
Individual Weight Kg (lb)
5.8 (12.8)
Weight Packaged Kg (lb)
13.3 (29.3)

  Stand Mounted   R45

The new ultra-compact (9cm cube) Radius 45 has been designed as an unobtrusive satellite speaker for multi-channel A/V systems. When combined with the compact Radius 360 subwoofer and front-channel satellites, the Radius 45 will complete an extremely discreet system that can be wall or stand mounted to blend with any environment.
click image
to enlarge
The Radius 45’s rear-firing 20mm gold C-CAM® tweeter is able to spread the sound around the room to create an encompassing surround channel effect. The tweeter is complemented by a forward-firing 3” MMP® II driver in a sealed-cabinet system with a frequency range of 120Hz-22kHz and power handling of 50 watts.

Available in the Radius range finishes: Video Silver, Rosemah veneers and black and white lacquer, together with a choice of grille colours, the diminutive Radius 45 is an easy décor match and easy to install by virtue of a high-quality pivoting die-cast metal wall bracket and stand-mounting options.

Its real wood veneer and lacquer finishes are crafted to the same exacting standards as Monitor Audio’s reference speaker systems and provide a quality that is at home anywhere, in stark contrast to the hard, cold metal appearance of many A/V speaker packages available.

3” MMP® II. Monitor Audio's second generation Metal Matrix Polymer cone material now uses a high-pressure injection moulding process to achieve different thicknesses at desired points of the cone geometry for greater stiffness and consistency resulting in superior bass and clearer mid-range frequencies.
20mm gold C-CAM® tweeter, rear-firing to enhance sound dispersion characteristics.
Magnetically shielded drivers for safe use near sensitive microprocessor equipment or video displays.
Rigid MDF construction throughout.
Smooth radius edges – reduces diffraction effects and gives better imaging properties.
Perforated grilles supplied in black and silver (white in place of black for white cabinets).
Single though-bolt driver fixing. Provides mechanical de-coupling properties resulting in enhanced mid-band clarity and resolution. Through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet.
Internal PTC auto-reset protection circuit to prevent over-driving.
Specially designed die-cast metal wall bracket system (supplied), providing 20 degree vertical and horizontal pivoting for easy positioning.

Specification

Frequency Response
120Hz – 20 KHz
Sensitivity (1W@1m)
87dB
Nominal Impedance (Ohms)
8
Maximum SPL
101dBA
Power Handling RMS (W)
25
Recommended processor/
receiver Crossover
Frequency
120 Hz (set to small)
Recommended amplifier requirements
5-50 Watt/ pc
System Power Handling RMS (W)
50
Bass Alignment
Sealed cabinet
Drive unit Complement Bass
1 x 3” MMP® II (Second generation metal matrix polymer)
Drive unit complement tweeter
1 x 20mm C-CAM® gold dome tweeter (rear firing)
External Dimensions
(cm)
9.5 H
9.5 W
9.5 D
External Dimensions
(inches)
3 ¾H
3 ¾W
3 ¾D
Individual Weight
(Kg)
2.03 Kg
Weight (each)
Kg / Ib
0.95 / 2Ib 1oz


Please click here for more products
Showroom Contact Us
Copyright © 2007 Audio People. All right reserved Designed by Webindia