| |
|
|
|
|
|
|
| To keep the GS10 and GS-LCR looking and performing at their best, a beautifully engineered stand is available, having the same die-cast alloy footprint as a GS20. The solid, stable speaker platform has integral rubber contact points for improved isolation and a discreet cable management system ensures that trailing cables remain out of sight. Slim and elegant, the GS stand will maximise the considerable sonic and aesthetic virtues of these GS designs |
|
 |
|
| 245D x 185W |
215D x 385W |
629 = 24 3/4”
602 = 235/8” |
481 = 18 15/16”
452= 17 3/4”
|
| 602 |
452 |
| 363D x 322W |
363D x 322W |
|
|
|
| Gold ‘CP’ In-Wall speakers utilise our C-CAM® (Ceramic Coated Aluminium Magnesium alloy) cone, featuring Rigid Surface Technology (RST®). Impressions on the cone’s surface are designed to eliminate bending, increase stiffness and lower mass when compared with conventional cone driver designs. The result is a much faster response, offering music reproduction that is closer to the original performance.
A rigid die-cast metal chassis design features a vented rear section and provides extremely low distortion with typically higher output levels. |
|
Additional high frequency and mid-range frequency controls allow the user to set-up the system precisely to obtain optimum performance within the listening environment. This inherent flexibility makes the Gold CP In-Wall speaker suitable for a wider range of demanding applications than that offered by its competitors. It promises a truly ‘high-end’ performance from a custom fit, discreetly installed speaker system.
The easy-to-install CP loudspeakers will accommodate walls and ceilings whose depth is between 9mm and 32mm. A secure fixing for the speaker/back-box is made by simply tightening the fixing clamps. Each CP speaker is supplied with a paintable grille, cut-out template, two Grille membranes (one for use during painting and the other as a clean replacement) and two spare baffle fixing screws. |
|
| 55Hz - 30KHz |
| 89dB |
| 8 Ohms |
| 106.5 dBA |
| 120W |
| 30 - 120W |
| Sealed Enclosure |
| 1 x 6 ½" C-CAM® bass driver featuring RST® technology |
| 1” (25mm) C-CAM® Gold Dome with high power ceramic magnet system & rear low resonance chamber |
423mm high x 270mm wide
(16 11/16" x 10 11/16") |
100mm
(3 15/16") |
387mm high x 234mm wide
(15 1/4 x 9 1/4 inches) |
95mm
(3 15/16") |
+3dB / 0dB / -dB high freq switch
+3dB / 0dB/ -3dB mid-range freq switch |
| 8 position 'dog' type fixings |
| Gold Plated 'push' type teminals |
| Mineral filled ABS plastic
(ul V1 fire rated) |
| 4.3Kg
(9.46) |
|
|
|
Gold ‘CP’ In-Wall speakers utilise our C-CAM® (Ceramic Coated Aluminium Magnesium alloy) cone, featuring Rigid Surface Technology (RST®). Impressions on the cone’s surface are designed to eliminate bending, increase stiffness and lower mass when compared with conventional cone driver designs. The result is a much faster response, offering music reproduction that is closer to the original performance.
A rigid die-cast metal chassis design features a vented rear section and provides extremely low distortion with typically higher output levels. |
|
Additional high frequency and mid-range frequency controls allow the user to set-up the system precisely to obtain optimum performance within the listening environment. This inherent flexibility makes the Gold CP In-Wall speaker suitable for a wider range of demanding applications than that offered by its competitors. It promises a truly ‘high-end’ performance from a custom fit, discreetly installed speaker system.
The easy-to-install CP loudspeakers will accommodate walls and ceilings whose depth is between 9mm and 32mm. A secure fixing for the speaker/back-box is made by simply tightening the fixing clamps. Each CP speaker is supplied with a paintable grille, cut-out template, two Grille membranes (one for use during painting and the other as a clean replacement) and two spare baffle fixing screws. |
|
| 55Hz - 30KHz |
| 89dB |
| 8 Ohms |
| 106.5 dBA |
| 120W |
| 30 - 120W |
| Sealed Enclosure |
| 1 x 6 ½" C-CAM® bass driver featuring RST® technology |
| Pivoting 1” (25mm) C-CAM® Gold Dome with high power ceramic magnet system |
281mm
(11 1/16") |
181mm
(7 1/8") |
250mm
(9 7/8") |
175mm
(6 7/8") |
+3dB / 0dB / -3dB high freq switch
+3dB / 0dB/ -3dB mid-range freq switch |
| 4 position 'dog' type fixings |
| Gold Plated 'push' type teminals |
Mineral filled ABS plastic
(ul V1 fire rated) |
3.1Kg
(6.82) |
|
|
|
|
|
|
|
|
|
|
