Products - Monitor Audio - Gold Signature
 
 

 
  Gold Signature   GS 10

The GS10 re-writes the book on compact monitor performance, easily eclipsing the dazzling standard set by its predecessor, the GR10. It may be small, but the GS10 showcases the multiple talents that make Gold Signature series so remarkable. With its advanced, low-resonance drivers, rigid build and contoured cabinet edges, the GS10 redefines accurate, low-colouration sound in a compact, stylish stand-mount speaker. Using the new, low distortion 6 1/2 inch RST® II bass-mid driver and gold C-CAM® tweeter developed especially for the GS series, the GS10 is capable of true 3-D imaging and tonal accuracy.
 
click image
to enlarge
Specification

Frequency Response:
40Hz - 43KHz
Sensitivity (1W@1M). dB:
88
Nominal Impedance. Ohms:
8
Maximum S.P.L (Per pair in room). dBA:
108
Power Handling (R.M.S). Watts:
100
Recommended amplifier requirements (R.M.S). Watts:
40 - 100
Bass Alignment:
Ported Bass Reflex (HiVe II Technology)
Tweeter Crossover Frequency. KHz:
2.7
Drive unit Complement:
1 x 6 ½” RST® II bass/mid-range driver 1x 1" (25mm) gold dome C-CAM® tweeter
External Dimensions -
mm (inches):
360 H x 206 W x 270 D
(14 3/16 H x 8 1/8 W x 10 5/8 D)
Weight (each):
8.5 Kg / 18.7lb

  Gold Signature   GS 20

The massively accomplished GR20 was a hard act to follow, but its successor, the GS20, pulls decisively ahead in all respects, combining gorgeous aesthetics, sublime sonics and superlative build quality. Its two-and-a-half way, three-driver configuration is built around a unique dual-cavity cabinet design, in which the 61/2-inch RST® II bass and bass-mid drivers work into separate enclosures, tuned to different frequencies and impedances. This provides improved power handling and delivers faster, deeper, more dynamic bass and greater transparency through the crucial mid-range. Above that, the gold C-CAM® tweeter ensures a smooth, detailed sound all the way up to 43 kHz, exploiting the full potential of the latest wide-bandwidth digital formats.

click image
to enlarge

Specification

Frequency Response:
32Hz - 43KHz
Sensitivity (1W@1M). dB:
89
Nominal Impedance. Ohms:
6
Maximum S.P.L (Per pair in room). dBA:
111
Power Handling (R.M.S). Watts:
150
Recommended amplifier requirements (R.M.S). Watts:
40 - 150
Bass Alignment:
Dual Chamber Bass Reflex with Differential Tuning (HiVe II Technology)
Tweeter Crossover Frequency. KHz:
2.7
Bass Crossover Frequency. Hz:
250
Drive unit Complement:
1 x 6 ½” RST® II bass driver 1 x 6” RST II bass/ mid driver 1x 1” (25mm) gold dome C-CAM® tweeter
External Dimensions - Excluding Plinth.
mm (inches):
924 H x 206 W x 280 D
(36 3/8 H x 8 1/8 W x 11 D)
External dimensions - Including Plinth.
mm (inches):
934 H x 322 W x 363 D
(36 3/4 H x 12 11/16 W x 14 5/16 D)
Weight (each) Including Plinth:
20.6 Kg (45.3lb)

  Gold Signature   GS 60

The elegantly proportioned GS60 embodies all the conviction and integrity of Monitor Audio design. Its thirty year heritage is eloquently expressed by a compelling unity of cutting-edge innovation and aesthetic creativity bringing life-like power, dynamics and realism to music and film. Like all models in the Gold Signature range, the flagship GS60 is a monument to the cabinet-maker’s art. Immaculate real wood or piano gloss finishes are blended with a slender, contemporary design and superb attention to detail, investing the GS60 with an air of resolute quality.
Click image
to enlarge

Specification

Frequency Response:
28Hz - 43KHz
Sensitivity (1W@1M). dB:
90
Nominal Impedance. Ohms:
6
Maximum S.P.L (Per pair in room). dBA:
112.5
Power Handling (R.M.S). Watts:
200
Recommended amplifier requirements (R.M.S). Watts:
60 - 200
Bass Alignment:
Sealed Mid-Range Enclosure. Dual Chamber Bass Reflex with Differential Tuning (HiVe II Technology)
Tweeter Crossover Frequency. KHz:
2.7
Bass Crossover Frequency. Hz:
150
Drive unit Complement:
2 x 6 ½” RST® II bass driver 1 x 6” RST® II mid driver 1x 1” (25mm) gold dome C-CAM® tweeter
External Dimensions - Excluding Plinth.
mm (inches):
1060 H x 206 W x 330 D
(41 3/4 H x 8 1/8 W x 13 D)
External dimensions -
Including Plinth.
mm (inches):
1070H x 322W x 403D
(42 1/8H x 12 11/16W x 15 7/8 D)
Weight (each) Including Plinth:
27.1Kg / 59.7lb

  Gold Signature   GSLCR

Amazing as it may seem, a centre speaker may be required to reproduce over 60% of the entire output of a film soundtrack. This means that it must deliver the dramatic impact of explosions and sound effects as precisely as it recreates the many tonal subtleties of dialogue. The outstanding dynamic reach and generous power handling of the Gold Signature LCR speaker allow it to master the most dynamic
Click image
to enlarge
drive conditions with ease and still have something in reserve. Monitor Audio has handling of the Gold Signature LCR speaker allow it to master the most dynamic drive conditions with ease and still have something in reserve. Monitor Audio has optimised the design to provide accuracy and control over a wide listening area while preserving the exact tonal signature and balance of the GS Series. This means that the GS LCR will integrate perfectly with any of the speakers in the Gold Signature range.

Specification

Frequency Response:
40Hz - 43KHz
Sensitivity (1W@1M). dB:
89
Nominal Impedance. Ohms:
8
Maximum S.P.L (Per pair in room). dBA:
110
Power Handling (R.M.S). Watts:
150
Recommended amplifier requirements (R.M.S). Watts:
40 - 150
Bass Alignment:
Sealed Enclosure
Tweeter Crossover Frequency. KHz:
2.7
Drive unit Complement:
2 x 6 ½” RST® II bass/mid-range driver 1x 1” (25mm) gold dome C-CAM® tweeter
External Dimensions - mm (inches):
206H x 560W x 230D
(8 1/8H x 22 1/16W x 9 1/16D)
Weight (each):
12.5Kg  (27.5lbs)

  Gold Signature   GSFX

The GS FX is a completely new design from Monitor Audio. Its advanced dual mode configuration can be switched automatically by a processor to accommodate a range of surround sound applications. The speaker’s slim-profiled angled baffle design incorporates no fewer than three driver pairs. When used in monopole mode to reproduce discrete side or rear channels, its front-firing 6 1/2 -inch RST® II bass/mid driver and gold C-CAM® tweeter come into play, delivering an accurate wide bandwidth sound-field to complement perfectly a front-channel GS speaker combination.
click image
to enlarge
The GS FX in dipole mode uses two side-firing pairings of 4-inch C-CAM® bass/mid driver and gold C-CAM® tweeter combined with the tailored output from the front-firing bass/mid driver to provide wonderfully diffused yet tonally precise surround effects.

Specification

Frequency Response:
60Hz - 43KHz
Sensitivity (1W@1M). dB:
86
Nominal Impedance. Ohms:
6
Maximum S.P.L (Per pair in room). dBA:
106
Power Handling (R.M.S). Watts:
100
Recommended amplifier requirements (R.M.S). Watts:
40 - 100
Bass Alignment:
Sealed Enclosure
Tweeter Crossover Frequency. KHz:
2.7
Drive unit Complement:
1 x 6 ½” RST® II bass/ mid monopole driver, 1 x  1” (25mm) gold dome C-CAM® monopole tweeter, 2 x 4" C-CAM® mid di-pole drivers, 2 x 25mm gold dome C-CAM® di-pole tweeters
External Dimensions - mm (inches):
310H x 390W x 160D
(12 3/16H x 15 3/8W x 6 5/16D)
Weight (each) Including Plinth:
25.3Lbs (11.5Kg)

Please click here for more products
Showroom Contact Us
Copyright © 2007 Audio People. All right reserved Designed by Webindia