| Our C-CAM® (Ceramic Coated Aluminium Magnesium alloy) cone profiles and rubber surrounds maximise the potential of the driver mechanism. The new surrounds allow greater cone excursions allowing lower distortion and improved frequency response linearity. The flush cone edge provides a very smooth response and a natural, accurate sound.
The Silver CP pivoting tweeter is based on Monitor Audio’s famous 1” (25mm) C-CAM® Gold Dome. Improvements to the surround and motor system have extended the frequency response to 30kHz, so that it is ready to exploit new wide bandwidth digital audio formats such as SACD and DVD-A.
An additional high frequency control offers a fine-tuning option to allow the user to set-up the system precisely and obtain optimum performance within the listening environment. This additional flexibility makes the Silver CP In-Ceiling speakers suitable for a wider range of demanding residential and commercial applications.
Fitting CP
The easy-to-install CP loudspeakers will accommodate walls and ceilings whose depth is between 9mm and 32mm. A secure fixing for the speaker/back-box is made by simply tightening the fixing clamps. Each CP speaker is supplied with a paintable grille, cut-out template, two Grille membranes (one for use during painting and the other as a clean replacement) and two spare baffle fixing screws.
Specification
Frequency response |
60Hz - 30KHz |
Sensitivity (1W@1M) |
89dB |
Impedance (nominal) |
8 Ohms |
Maximum SPL |
105.8 dBA |
Power Handling |
100W |
Amp Requirements |
30 - 100W |
Bass Alignment |
Sealed Enclosure |
Drive Unit Complement Bass |
1 x 6.5" C-CAM® bass driver |
Drive Unit Complement tweeter |
Pivoting 1” (25mm) C-CAM® Gold Dome with rare earth magnet |
Overall Diameter / Size |
281mm
(11 1/16") |
Overall Depth |
181mm
(7 1/8") |
Cut-out hole diameter / Size |
250mm
(9 7/8") |
Mounting Depth mm (inch) |
175mm
(6 7/8") |
Controls |
+3dB / 0dB / -dB high freq switch |
Fixing Type |
4 position 'dog' type fixings |
Connection |
Gold Plated 'push' type teminals |
Back box / Mounting flange Material |
Mineral filled ABS plastic
(ul V1 fire rated) |
Weight Kg (lb) |
2.54Kg
(5.6) |
|
|
