| The Bronze drive unit, (MMP® II) offers an advanced driver technology developed from Monitor Audio’s original Metal Matrix Polymer cone material and uses a high-pressure injection moulding process to achieve different thickness at critical points in the cone geometry. MMP® II provides better stiffness and consistency and tighter production tolerances resulting in superior sonic performance. The new bass-mid chassis design has a vented rear section that reduces thermal power compression to deliver increased dynamic range and higher sound pressure levels. This venting also lowers distortion by balancing the pressure within the voice-coil motor system. It means clean, crisp bass and an even clearer mid-range performance.
High frequency performance has been improved by the evolution of the C-CAM® Gold Dome tweeter. The new tweeter utilises a pivoting action to provide optimum imaging and flexible set-up options. The bespoke crossover uses high-grade polypropylene film capacitors, and low distortion inductors.
Fitting CP
The easy-to-install CP loudspeakers will accommodate walls and ceilings whose depth is between 9mm and 32mm. A secure fixing for the speaker/back-box is made by simply tightening the fixing clamps. Each CP speaker is supplied with a paintable grille, cut-out template, two Grille membranes (one for use during painting and the other as a clean replacement) and two spare baffle fixing screws.
Specification
Frequency response |
62Hz - 22KHz |
Impedance (nominal) |
8 Ohms |
Sensitivity (1W@1M) |
88dB |
Maximum SPL |
105 dBA |
Power Handling |
80W |
Amp Requirements |
20 - 80W |
Bass Alignment |
Sealed Enclosure |
Drive Unit Complement Bass |
1 x 6.5" MMP®II second generation metal matrix polymer |
Drive Unit Complement tweeter |
1” (25mm) C-CAM® Gold Dome with rare earth magnet |
Overall Diameter / Size |
423mm high x 270mm wide
(16 11/16" x 10 11/16") |
Overall Depth |
100mm
(3 15/16") |
Cut-out hole diameter / Size |
387mm high x 234mm wide
(15 1/4 x 9 1/4 inches) |
Mounting Depth mm (inch) |
95mm
(3 15/16") |
Controls |
N/a |
Fixing Type |
8 position 'dog' type fixings |
Connection |
Gold Plated 'push' type teminals |
Back box / Mounting flange Material |
Mineral filled ABS plastic
(ul V1 fire rated) |
Weight Kg (lb) |
3.1Kg
(6.82) |
|
|
