The SF-1 makes efficient use of a magnetically shielded, 6.5-inch graphite-injected woofer and a 1-inch aluminum diaphragm compression driver coupled to a Klipsch 5-inch square Tractrix® Horn, creating realistic spatial imaging and smooth, uncolored sound reproduction. A large, flared port extends the SF-1’s deep, authoritative bass without turbulence noise or dynamic compression.

Other class-leading design features, such as high-definition crossover networks and internally braced enclosures help ensure peak performance from every SF-1, while the unique venting system of its cast-polymer woofer frame cools the voice coil to enhance reliability.

The SF-1’s enclosure employs the highest-quality MDF construction and is finished in jet ash vinyl veneer. This floorstander also features a “floating,” or suspended, grille design, which minimizes image-impairing sonic reflections.

The SF-1’s surprising high level of smooth and seamless sound reproduction creates a knock-your-socks off experience that will impress your friends and provide years of high-quality audio entertainment.

Synergy is more than just a name – it's a philosophy of high-value and high-performance engineering. The SF-2 floorstanding loudspeaker backs this notion by delivering dynamic sound experiences that boast outstanding clarity and impact. Hands down, it is the best sounding floorstander on the market at such a modest price point.

The SF-2's tweeter utilizes a 1-inch aluminum-diaphragm compression driver coupled to a Klipsch 5-inch square Tractrix® Horn. This driver assembly is so efficient (96dB) that listeners can enjoy high volumes with low distortion without needing an expensive over- powered amplifier. Two 6.5-inch magnetically shielded, graphite-injected woofers provide powerful bass with remarkable sonic detail. A large flared port bolsters low bass output with minimum turbulence.

From their high-definition crossover networks to internally braced enclosures, SF-2 loudspeakers offer the benefits of more than 55 years of Klipsch engineering experience. Highest-grade MDF construction and cast-polymer woofer frames control resonance at even the most intense output levels.

The SF-2 is finished in jet ash vinyl veneer and features a “floating,” or suspended, grille design, which minimizes image-impairing sonic reflections.

This floorstander's expert combination of smart new designs and tried and true Klipsch technology provide incredible life-like music and film sound reproduction. And its wide, deep soundstage and exceptional imaging are typical of all Synergy Series models.

SPECIFICATIONS

FREQUENCY RESPONSE :
35Hz-20kHz±3dB

SENSITIVITY :
96dB @ 1watt/1meter

POWER HANDLING :
100 watts maximum continuous (400 watts peak)

NOMINAL IMPEDANCE :
8 ohms

ENCLOSURE TYPE :
Bass reflex via rear-mounted port

DRIVE COMPONENTS :
Two-way system using one 1" (2.54cm) magnetically shielded, neodymium magnet, aluminum dome compression driver tweeter with a 5" (12.7cm) square 90°x60° Tractrix® Horn and two 6.5" (16.51cm) magnetically shielded, IMG cone woofers

TWEETER :
K-101-S 1" (2.54cm) Aluminum dome compression driver

HIGH FREQUENCY HORN :
5" square 90°x60° Tractrix® Horn

HF CROSSOVER :
2800Hz

WOOFER :
Two K-1078-SB 6.5" (16.51cm) IMG cone / cast polymer frame

DIMENSIONS :
35" (88.9cm) x 8" (20.32cm) x 13.6" (34.54cm)

WEIGHT :
38 lbs. (17.25kg)

ENCLOSURE MATERIAL :
Medium density fiberboard construction (MDF)

FINISHES :
Black ash vinyl veneer

YEARS BUILT :
1999 -

The Synergy Series represents the world's greatest value in high-performance home entertainment. The SF-3 floorstanding loudspeaker supports this claim by using high-quality materials, reliable components and distinguished cosmetics to deliver incredibly dynamic and accurate performances.

The SF-3's virtuosity comes from its dual 8-inch, magnetically shielded woofers and 1-inch aluminum diaphragm compression driver coupled to a Klipsch 6-inch square Tractrix® Horn. This advanced combination results in powerful bass with remarkable detail and high volumes with low distortion.

The woofers employ graphite-injected cones that are light and rigid, which allows better damping for further reduced distortion. The cast-polymer woofer frames have high impact tolerance to stabilize the driver motors and feature a unique venting system that cools the voice coil to enhance reliability. A large flared port bolsters low bass output with minimum turbulence.

The SF-3 is an exceptional performer due to its high-definition crossover networks and internally braced enclosures. Not to mention, it benefits from more than 55 years of Klipsch engineering experience.

This floorstander comes in a jet ash vinyl veneer finish and features a “floating,” or suspended, grille design, which minimizes image-impairing sonic reflections.

By offering high-performance technology at an affordable price point, the SF-3 invites new listeners to discover Klipsch, and experience an adrenaline rush of sound.

SPECIFICATIONS

FREQUENCY RESPONSE :
37Hz-20kHz ±3dB

SENSITIVITY :
98dB @ 1watt/1meter

POWER HANDLING :
150 watts maximum continuous (600 watts peak)

NOMINAL IMPEDANCE :
8 ohms

ENCLOSURE TYPE :
Bass reflex via rear-mounted port

DRIVE COMPONENTS :
Two-way sytem using one 1" (2.54cm) magnetically shielded, aluminum dome compression driver tweeter with a 6" (15.24cm) square 90° x 60° Tractrix® Horn and two 8" (20.32cm) magnetically shielded, IMG

TWEETER :
1" (2.54cm) Aluminum dome compression driver

HIGH FREQUENCY HORN :
6" square 90°x60° Tractrix® Horn

HF CROSSOVER :
1975Hz

WOOFER :
Two 8" (20.32cm) IMG cone / cast polymer frame

DIMENSIONS :
38.5" (97.8cm) x 9" (22.9cm) x 16.2" (41cm)

WEIGHT :
56 lbs. (25.5kg)

ENCLOSURE MATERIAL :
Medium density fiberboard construction (MDF)

FINISHES :
Black ash vinyl veneer

YEARS BUILT :
2003 -