| |
|
Specifications |
|
| |
|
|
|
Output: |
|
| |
|
Power |
50 Watts per channel into 8 ohms (17dBW)
80 Watts per channel into 4 ohms |
| |
|
Voltage RMS |
>20 Volts 20Hz to 20 kHz |
| |
|
Voltage Peak-to-peak |
67 Volts |
| |
|
Current Peak-to-peak |
30 Amps |
| |
|
Damping factor |
80 |
| |
|
Output devices per channel |
2 |
| |
|
Pre-output impedance
|
47 Ohms |
| |
|
| |
|
Line inputs: |
|
| |
|
THD + noise, 20 Hz to 20 kHz |
< 0.01% |
| |
|
Signal / noise ratio |
>98dB 'A'-weighted |
| |
|
Input sensitivity for 70 watts |
172mV |
| |
|
Input impedance |
220k Ohms |
| |
|
Overload margin |
26dB |
| |
|
Channel separation |
> 80dB typical |
| |
|
Frequency response
|
20Hz to 20kHz, + 0, - 0.2dBm |
| |
|
Phono input: |
|
| |
|
Signal / noise ratio |
> 96dB 'A'-weighted |
| |
|
Input sensitivity |
2.5mV (moving magnet) |
| |
|
Input impedance |
47k Ohms |
| |
|
Overload margin |
|
| |
|
Connections: |
|
| |
|
Line level inputs |
3 pairs line level RCA connectors
1 front panel 3.5mm jack socket (sharing AUX1 input)
1 pair phono (MM) RCA connectors |
| |
|
Line level outputs |
1 pair RCA [preamp] controlled by the volume
1 pair RCA [tape record] fixed line level output |
| |
|
Speaker outputs |
1 pair 4mm banana plug/binding posts per channel |
| |
|
Power requirement |
For use only with suitable Musical Fidelity power supply. (A Triple-X unit is included) |
| |
|
| |
|
Weight: |
|
| |
|
Unit only, unboxed |
3.85kg, 8.5lbs |
| |
|
| In shipping carton (including triple-X PSU) |
11kg, 24.2lbs
|
| |
|
| Standard accessories: |
|
| |
|
| |
Remote control (A5 universal type)
2 batteries size LR03 or AAA, manganese alkaline type Triple-X PSU |
| |
|
