MusicalFidelity
Specifications
Output:
Voltage RMS, maximum
> 43 Volts
Impedance
32 Ohms
Frequency response deviation from RIAA
20Hz to 20kHz ±0.1dB
Input:
Total harmonic distortion + noise, 20Hz to 20kHz
< 0.012% (MM, 10 Volts output)
Input sensitivity for 300mV RMS output
2.9mV Moving Magnet, 500µV Moving Coil
Input impedance
MC: Switched, 10 Ohms internal, or user adjustable by external RCA-type loading plug. Without plug 47k Ohms.
Overload margin
42dB above rated input at 1kHz (MM)
Channel separation
> 64dB 20Hz to 20kHz
Channel balance error
< 0.5dB typical
Signal / noise ref. 1Volt RMS output
> 78dB Moving Magnet ('A'-weighted)
Frequency response reference IEC, RIAA
- see graph . . . .
General:
Input sockets:
2 phono Moving Magnet via RCA connector
Output sockets:
2 RCA connectors for line level output
Power requirements:
115 / 230 Volts or 100 V AC 50 / 60Hz (factory preset) 25 watts maximum
Dimensions:
483mm, 19 inches wide
Weights:
18.15Kg, 40 lbs unit only, unboxed
Standard accessories:
IEC mains lead - 10 Amp type
