| |
|
Specifications |
|
| |
|
|
|
Output: |
|
|
|
Power |
750 Watts per channel into 8 Ohms (29dBW), 1100 Watts per channel into 4 Ohms |
| |
|
Voltage, RMS |
77.5 Volts 20Hz to 20kHz |
| |
|
Voltage, peak-to-peak |
219 Volts |
| |
|
Current, peak-to-peak |
250 Amps |
| |
|
Damping factor |
204 |
| |
|
Output devices per channel |
20 |
| |
|
Loop out impedance
|
50 Ohms |
| |
|
Line inputs: |
|
| |
|
Total harmonic distortion + noise |
< 0.004% 20Hz to 20kHz |
| |
|
Signal / noise ratio |
> 124dB 'A'-weighted |
| |
|
Input sensitivity for 750 Watts into 8 Ohms |
2.4 Volts |
| |
|
Input impedance |
100k Ohms |
| |
|
Channel separation |
> 93dB typical |
| |
|
Frequency response
|
20Hz to 20kHz, +0, -0.2dB |
| |
|
General: |
|
| |
|
Input |
1 pair line level RCA connectors |
| |
|
Outputs |
2 amplifier channels via 2 pairs per channel binding posts, 1 pair RCA loop output sockets |
| |
|
Power requirement |
100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),
2500 Watts at maximum audio power into 8 Ohms, 290 Watts idle
|
| |
|
Dimensions: |
|
| |
|
Amplifier |
483 mm, 19 inches wide
167 mm, 21.8 inches high including feet
553 mm, 15.75 inches deep including rear terminals |
| |
|
Power supply |
364 mm, 14.4 inches wide
167 mm, 6.6 inches high including feet
278 mm, 11 inches deep including rear sockets
|
| |
|
Weight: |
|
| |
|
Amplifier |
34.1 kg, 75.1 lbs unit only, unboxed
45.2 kg, 100 lbs in shipping carton |
| |
|
Power supply |
18.4 kg, 40.6 lbs unit only, unboxed
21.4 kg, 47.2 lbs in shipping carton
|
| |
|
Standard accessories: |
|
| |
|
IEC mains lead - (16-Amp type) |
one, 2.4 metres (94.5 inches) |
| |
|
Low voltage interconnection leads |
two, 1.2 metres (47.3 inches) |
| |
|
Control interconnection lead |
one, 1.2 metres (47.3 inches) |
| |
|
| |
|
