The Audio People
The Audio People
Products Profile Contact Us Home
spacer

bullet MusicalFidelity  

 
 
   
Specifications
 
   
 
Output:
   
Power 255 Watts per channel into 8 Ohms (24dBW),
416 Watts per channel into 4 Ohms
   
Voltage, RMS 45.2 Volts 20Hz to 20kHz
   
Voltage, Peak-to-peak 118.8 Volts
   
Current peak-to-peak 200 Amps
   
Damping factor 170
   

Output devices per channel

 

8
 
Line inputs:
   
Total harmonic distortion + noise, < 0.01% 20Hz to 20kHz
   
Signal / noise ratio > 109dB 'A'-weighted
   
Input sensitivity for 255 Watts into 8 Ohms 1.5V
   
Input impedance 100k Ohms
   
Channel separation > 90dB typical
   
Frequency response 10Hz to 100kHz, +0, -1.5 dB
   
Inputs

"A" 1 pair line level RCA connectors
"B" 1 pair line level RCA connectors

 

 
General:
   
Outputs 2 amplifier channels via 2 pairs per channel binding posts
1 pair RCA loop output sockets
   
Power requirement 100 / 115 / 230Volts AC 50 / 60Hz (factory pre-set),
750 Watts maximum into 8 Ohms, 70 Watts idle
   
Weight 19.1 kg, 42.1 lbs unit only, unboxed
23.75 kg, 52.4 lbs in shipping carton
   
Dimensions 440 mm, 17.3 inches wide
125 mm, 4.9 inches high including feet
400 mm, 15.75 inches deep including terminals
   
Standard accessories IEC type mains lead (10-Amp type)
   


spacer
Musical fidelity
spacer
bullet

Supercharger

bullet KWSeries
bullet A1008Series
spacer
bullet A5Series
spacer
bullet X-Series
bullet Small X-Series
bullet Archived
 
   
spacer
spacer
 

[ HOME ]  [ PRODUCTS ]  [ PROFILE ]  [ CONTACT US ]