| |
|
Specifications |
|
| |
|
|
|
| Output:
|
|
| |
|
Voltage,
RMS |
45 Volts 20Hz
to 20kHz |
| |
|
Voltage,
Peak-to-peak |
127.3
Volts |
|
| |
|
td>
| 250 Watts per
channel into 8 Ohms (24dBW)
400 Watts per channel
into 4 Ohms |
| |
|
Current Peak-to-peak |
75 Amps |
| |
|
Damping factor |
140 |
| Output devices per
channel |
4 |
| |
|
Pre-out
impedance
|
50
Ohms |
| |
|
Line
inputs: |
|
| |
|
THD +
N, 20Hz to 20kHz |
< 0.01%,
typical |
| |
|
Signal / noise
ratio |
>100dB
'A'-weighted |
| |
|
Input
sensitivity for 250W |
330mV |
| |
|
Input
impedance |
220k
Ohms |
| |
|
Overload
margin |
26dB |
| |
|
Channel
separation |
> 70dB
typical |
| |
|
Frequency
responsem
|
20Hz to
20kHz, +0, -0.2dB |
| |
|
DAC: |
|
| |
|
DAC circuit |
24 bit Delta-Sgma (Bit stream) dual differential 8X over sampling |
| |
|
Total correlated jitter |
< 135pS |
| |
|
Linearity |
<0.1dB down to -96dB |
| |
|
Output digital 0dB level |
2.18 VRMS at 1kHz nominal |
| |
|
Frequency response |
10Hz to 20kHz nominal |
| |
|
Channel separation |
> 105dB 20Hz to 20kHz |
| |
|
Signal/noise ratio |
>17dB 'A'-weighted |
| |
|
| Total Harmonic distortion |
<0.003% 10Hz to 20kHz |
| |
|
| Phono input response: |
RIAA/IEC combined, see graph |
| |
|
| Signal/noise ratio |
>96dB 'A'-weighted |
| |
|
| Input sensitivity |
2.5mV (MM)
0.5mV (MC) |
| |
|
| Input impedance |
47K Ohms (MM and MC) |
| |
|
| Overload margin |
24dB (MM and MC) |
| |
|
| |
|
| Connections: |
|
| |
|
| Line level inputs: |
4 pairs ine level RCA connectors,
1 pair phono (MM/MC) RCA connectors |
| |
|
| Line level outputs: |
1 pair RCA [preamp] controlled by the volume
1 pair RCA [tape record] fixed line level |
| |
|
| Digital inputs: |
1 USB 1.1 [32, 44, 1, 48 kHz sample rates] connector for computer only
2 S/PDIF (RCA connector)
1 optical (TOSLINK) |
| |
|
| Digital outputs: |
1 S/PDIF (RCA connector)
1 optical (TOSLINK) |
| |
|
| Speaker outputs: |
1 pair 4mm banana plug/binding posts per channel |
| |
|
| |
|
| Power requirement: |
|
| |
|
100 / 115 / 230 Volts AC
50 / 60Hz (factory pre-set) |
700 Watts maximum into 8 Ohms, 120 Watts idle |
| |
|
| |
|
| Standard accessories: |
|
| |
|
| Power Supply Unit |
A1008 Power Supply Unit 1 off |
| |
|
| Power supply lead, Control |
1.0m 39 1/4 inches 1 off |
| |
|
Power supply leads,
Left & Right Supplies |
1.0m 39 1/4 inches 2 off |
| |
|
| Mains lead |
10 Amp IEC type 1 off |
| |
|
| Remote control |
A1008, universal 1 off |
| |
|
| Batteries |
Size LR03 or AAA, manganese alkaline type 2 off |
| |
|
| |
|
| Dimensions: |
|
| |
|
| Main unit |
440mm, 17 1/3 inches wide
125mm, 5 inches high inc. feet
400mm, 15 3/4 inches deep inc. terminals |
| |
|
| Power supply |
254mm, 10 inches wide
125mm, 5 inches high inc. feet
380mm, 15 inches deep inc. terminals |
| |
|
| |
|
| Weight: |
|
| |
|
| Main unit |
13kg, 30 1/3 lbs unboxed
32kg, 70 1/2 lbs boxed unit including power supply and all accessories |
| |
|
| Power supply |
9.7kg, 21 1/3 lbs unboxed |
| |
|